Table of Contents
Advertisement
Memory configurations
You may install 4 GB, 8 GB, 16 GB, 32 GB, and 64 GB RDIMMs; and 32 GB, 64 GB, and 128
GB LRDIMMs into the DIMM sockets.
For Intel
sizes in Channel A, Channel B, Channel C, and Channel D. The system maps the total size
of the lower-sized channel for the quad-channel configuration. Any excess memory from
the higher-sized channel is then mapped for single-channel operation.
•
•
•
•
1-6
Skylake/Cascade Lake-W Series Processors, you may install varying memory
®
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value.
For system stability, use a more efficient memory cooling system to support a full
memory load (8 DIMMs) or overclocking condition.
Always install the DIMMS with the same CAS Latency. For an optimum compatibility,
we recommend that you install memory modules of the same version or data code
(D/C) from the same vendor. Check with the vendor to get the correct memory
modules.
Visit the ASUS website for the latest QVL.
Chapter 1: Product Introduction
Advertisement
Table of Contents
