Table of Contents
Advertisement
4.1.2
Installing storage devices
The motherboard supports Serial ATA hard disk drives and PCIE SSD storage devices. For
optimal performance, install identical drives of the same model and capacity when creating a
disk array.
Refer to Chapter 2 for details on installing storage devices to your motherboard.
4.1.3
Intel
To enter the Intel
®
1.
Enter the BIOS Setup during POST.
2.
Go to the Advanced menu > PCH Storage Configuration, then press <Enter>.
3.
Set the SATA Mode Selection item to [Intel RST Premium (RAID)].
4.
Go to the Boot menu > CSM (Compatibility Support Module) > Launch CSM, then
set the item to [Disabled].
5.
Save your changes and exit the BIOS Setup, then enter the BIOS Setup again.
6.
Go to the Advanced menu > Intel(R) RSTe SATA Controller then press <Enter> to
display the Intel
Refer to Chapter 3 for details on entering and navigating through the BIOS Setup.
Due to chipset limitation, when SATA ports are set to RAID mode, all SATA ports run at
RAID mode together.
4-2
Rapid Storage Technology in UEFI BIOS
®
Rapid Storage Technology in UEFI BIOS:
Rapid Storage Technology enterprise menu.
®
Chapter 4: RAID Configurations
Advertisement
Table of Contents
