Table of Contents
Advertisement
1.1.9
Internal connectors
1.
Intel
Serial ATA 6 Gb/s connectors (7-pin SATA6G_12; SATA 6G_34;
®
SATA 6G_56)
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s
signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
Intel
C422 chipset.
®
These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA
RAID set using these connectors, set the SATA Mode item in the BIOS to [Intel RST
Premium (RAID)].
1-18
Rapid Storage Technology enterprise through the onboard
®
Chapter 1: Product Introduction
Advertisement
Table of Contents
