Danfoss FT1555-BM Operator's Manual page 9

Danfoss FT1555-BM bench mount capping machine Operator's Manual
Maintenance
Step 5:
Turn the unit on the front side and remove the three 1/4-20 x 3/8"
button head cap screws from the base plate using a 5/32" hex key
wrench. (See Figure 15).
Figure 15
Step 6:
Remove the switch end plate and inspect the air intake grill for
debris. Using a coarse brush remove any debris from the intake grill
that could obstruct air flow. (See Figure 16).
Figure 16
AQ445452814730en-000101
Step 7:
Replace the main switch end plate. (See Figure 17).
Figure 17
Step 8:
Reinstall the foam filter and retainer and return unit to service.
(See Figure 18).
Figure 18
© Danfoss FT1555-BM bench mount capping machine Operator's Manual | 2023.03. | 9