Cd / Mp3 Player; Mp3 Recommendations; Loading And Playing An Audio Cd - RCA RTD255 User Manual

RTD255-EN CD_MP3 3/12/04 10:56 AM Page 2

CD / mp3 Player

mp3 recommendations

• Use .mp3 as the extension when converting
audio files into mp3 for saving onto CD-R(W) or
CD-ROM, e.g. Rocky08.mp3. Do not use any other
extension e.g. .doc, .pdf.
• Do not use the .mp3 extension for other text or
non-audio data files as this may result in serious
malfunction and harmful noise interference.
• Most commonly available CD creation software
can make files compatible for the system but do
not forget to finalize your disc after creation. This
set cannot read DirectCD recordings.
•In order to get audio CD quality, you need to
record your MP3 CD at 128 kbps. You can record
up to 256 kbps. Beyond 256 kbps, the unit might
not read the CD.
• Do not combine CD Audio and MP3 tracks onto
a CD-R(W) or CD-ROM. The player will only
playback CD audio tracks from mixed CD formats.
Note:
• If over 400 items (songs/folders) are on
the disc, only the first 400 songs can be
played.
• Resume function does not operate in mp3 mode.
Press SOURCE on the main unit or DVD/CD on the remote
to select the DVD/CD input source.
SUBWOOFER
30

Loading and playing an audio CD

1. Press OPEN/CLOSE on the front panel to open the disc
tray. Place the disc on the disc tray with the label side
facing up. Press OPEN/CLOSE again to close disc tray.
2. Press DISCSKIP or 1-5 on the remote control to select
another disc. The disc will be read to detect whether an
audio CD or mp3 CD has been inserted.
Note:
If the CD is a mp3 CD, reading may take up
to 2 minutes.
3. Press PLAY/PAUSE to start the playback.
4. Press PLAY/PAUSE on the main unit or PAUSE on the
remote control to pause playback. Press PLAY/PAUSE again
on the main unit or PLAY on the remote to resume normal
playback.
Note:
Be sure to remove all the discs from the
disc compartment before moving or trans-
porting the unit!
5. Press SKIP REVERSE on the main unit or CH- on the
remote to return to the previous track. Press SKIP FOR-
WARD on the main unit or CH + on the remote to go to
the next track.
6. Press STOP on the main unit or STOP on the remote con-
trol to end playback.
AUX 2 AUX 1
VCR SAT - CABLE
Note:
When playback is interrupted, the location
at which it stopped will be memorized.
Playback will resume at the position it was
last stopped. Resume playback does not work with mp3
music.
CD / mp3 Player
Quick scan
1. Press FORWARD or REVERSE on the remote to scan
through a track quickly during playback. To change speed
to 1, 2 or 3 times, press repeatedly during scan. Quick scan
does not work with mp3 music.
2. Press PLAY on the main unit or the remote to resume
normal playback.
EN
31