Using The Input Button; Using The Remote To Navigate Through On-Screen Menus - RCA DRC6350N User Manual

Using the Remote Control
GUIDE Accesses the GUIDE Plus+ programming guide if the TV has that feature.
INPUT Tunes to the TV's Video Input Channel(s). For more information about Video Input Channels, go to
page 59.
MUTE Lowers the volume to minimum level. Press again to restore volume.
ON•OFF Turns off a compatible RCA, GE, or Proscan TV.
TV Turns on a compatible RCA, GE, or Proscan TV and puts the remote in TV mode.
VOL +/- Increases and decreases volume level.

Using the INPUT Button

Use the INPUT button to scroll through the available Video Input Channels (LINE1 and LINE2) and regular
broadcast signals. The Video Input Channels allow you to view images from a device connected to the
DVD/VCR (like a camcorder).
1. Press the remote control's VCR button to enter VCR mode. Make sure that the DVD/VCR is turned ON.
2. Press the remote control's INPUT button to tune to the Video Input Channel. LINE1 represents the rear
A/V jacks and LINE2 represents the front A/V jacks).
3. To tune back to the broadcast signal you were previously watching through the DVD/VCR, press the
INPUT button again.
DVD
VCR TV
VOL
MUTE
CLEAR
AU DIO
LOC K
SUBTIT LE
TIMER
INFO
1
4
7
INPUT
REVERSE PLAY
RECOR D STOP
AGAIN ZO OM
S PE ED SEARCH
Use the arrow buttons to
highlight on-screen options. Use
the OK button to select an option
that is highlighted.
16
ON • OF F
G O B A C K
CH
RETU R N
MEN U
Arrow
buttons
ANGLE
OK
TIT LE
GUIDE
button
2 3
5 6
8 9
PLAY MODE
0
TV • VCR
FORWAR D
PAUSE
OPEN • CLOSE
Using the remote to Navigate through On-Screen
Menus
No matter which on-screen display you're using (the DVD
player's menu, the Info Display that appears during playback,
the VCR Main menu, or a disc's menu), you'll use the same
buttons on the remote control to move through the on-
screen display: the four arrow buttons and the OK button.
Use the arrow buttons on the remote to move through
on-screen menus in the direction of the arrow button (to
go right, press the right arrow button; to move left, press
the left arrow button, etc.). The arrow buttons are used to
highlight an option. Once highlighted, press the OK button
to select that menu option.
Chapter 2