Installing The System Fan; Removing The System Board - Dell D17M Owner's Manual

Installing the System Fan

1. Place the system fan on the computer.
2. Tighten the screws to secure the system fan to the computer.
3. Connect the system-fan cable to the connector on the system board.
4. Install the cover.
5. Follow the procedures in

Removing the System Board

1. Follow the procedures in
2. Remove the:
• cover
• bezel
• optical drive
• hard drive
• heatsink module
• processor
• memory
• expansion cards
• I/O panel
3. Follow the steps to remove the system board:
a. Disconnect and un-thread all the cables connected to the system board.
b. Remove the screws that secure the system board to the computer.
c. Slide the system board towards the front of the computer and tilt to a 45–degree angle.
d. Lift and remove the system board out of the computer.
22
After Working Inside Your
Before Working Inside Your
Computer.
Computer.