Asus H110M-E/M.2 Manual page 14

Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port
Light Blue (Rear
panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
To configure a 7.1-channel audio output:
7. USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1
devices.
8. USB 3.0 ports. These 9-pin Universal Serial Bus (USB) ports are for USB 3.0/2.0
devices.
Due to the design of the Intel
2.0 and USB 3.0 ports are controlled by the xHCI controller. Some legacy USB devices
must update their firmware for better compatibility.
9. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-Ray, and other protected
content.
10. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
1-6
Headset
2.1-channel
Line In Rear Speaker Out
Line Out Front Speaker Out
Mic In
-
Use a chassis with HD audio module in the front panel to support a 7.1-channel audio
output.
®
4.1-channel 5.1-channel
Rear Speaker Out
Front Speaker Out
Mic In Bass/Center
-
100 series chipset, all USB devices connected to the USB
7.1-channel
Rear Speaker Out
Front Speaker Out
Bass/Center
- Side Speaker Out
Chapter 1: Product introduction