Mazda B3000 2006 Manual page 258

Maintenance and Specifications
IDENTIFYING YOUR VEHICLE
Safety Compliance Certification Label
The National Highway Traffic Safety
Administration Regulations require
that a Safety Compliance
Certification Label be affixed to a
vehicle and prescribe where the
Safety Compliance Certification
Label may be located. The Safety
Compliance Certification Label is
located on the structure by the
trailing edge of the driver's door or
the edge of the driver's door.
Vehicle identification number (VIN)
The vehicle identification number is
attached to a metal tag and is
located on the driver side
instrument panel.
Please note that in the graphic,
XXXX is representative of your
vehicle identification number.
258
MFD. BY FORD MOTOR CO. IN U.S.A.
FOR MAZDA MOTOR CORPORATION
DATE: XX/XX
FRONT GAWR: XXXXL
WITH
XXXXKG
TIRES
XXXX/XXXXXXX
RIMS
XXXX.XX
AT XXX kPa/XX PSI COLD
THIS VEHICLE CONFORMS TO ALL APPLICABLE FEDERAL MOTOR
VEHICLE SAFETY AND THEFT PREVENTION STANDARDS IN
EFFECT ON THE DATE OF MANUFACTURE SHOWN ABOVE.
VIN:
XXXXXXXXXXXXXXXXX
TYPE: XXX
EXT PNT: XX
WB BRK INT TR TP/PS
XXX X XX
XXXXXXXXXXXXX XXX
XXXXXXXXXXXXXXXXX
GVWR:XXXXXLB/ XXXXXKG
REAR GAWR: XXXXLB
XXXXKG
XXXX/XXXXXXX
XXXX.XX
AT XXX kPa/XX PSI COLD
XXXXX
XXXXX
RC: XX DSO:
R AXLE TR SPR
XXXXX
X XX X XX XXX
XXXX-XXXXXXX-XX
WITH
TIRES
RIMS