Marantz SR5012 Owner's Manual page 142

Contents Connections
Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items
Dialog Level Adjust
Subwoofer Level Adjust
Surround Parameter
Audio M-DAX
Audio Delay
Volume
Audyssey
Graphic EQ
Picture Adjust
HDMI Setup
Output Settings
On Screen Display
Video
4K Signal Format
TV Format
Front panel Display
Playback
This setting adjusts the output level to clarify the dialogue output from the center
channel.
This setting adjusts the volume level for the subwoofer.
Adjusts surround sound parameters.
Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
Compensates for incorrect timing between video and audio.
Sets the MAIN ZONE (room where the unit is located) volume setting.
Makes Audyssey MultEQ ® XT, Audyssey Dynamic EQ
Volume ® settings.
Uses the graphic equalizer to adjust the tone of each speaker.
Adjusts picture quality.
Makes settings for HDMI Audio Out, HDMI Pass Through and HDMI Control settings.
Makes settings for video output.
Configures the on-screen display settings.
Set the 4K signal format when the TV or playback device is 4K compatible.
Sets the video signal format to be output for the TV you are using.
142
Rear panel
Settings Tips
Description
® and Audyssey Dynamic
Remote Index
Appendix
Page
147
147
148
151
152
153
154
156
158
160
165
169
170
171