v2.0 (1.0.2.0) (EN/F/E)
QuickStartGuide
EZ1100 Series RCA Small Wonder Camcorder
Congratulations on purchasing your new RCA Small Wonder Camcorder.
Please read these instructions for quick tips on using the product.
The User Manual PDF fi le can also be found in the CD ROM under the User Manuals folder.
1. Content of the box
•
Small Wonder Camcorder
•
AV cable
•
AAA batteries x 4
•
CD-ROM
•
USB cable
•
Quick Start Guide
2. Battery Installation
3
2
1
Push (to the right) to
Observe the polarities.
unlock.
The camcorder can also be powered by USB.
Refer to Connecting to a PC section in the User
Manual for connecting details.
When the camcorder is connected to a PC, three options will be
displayed: USB connect, Web cam and USB power. Press + or - to select USB power and press
RECORD
to confi rm.
3. General controls
SD card slot
English
www.rcaaudiovideo.com
Camcorder strap hole
4. Inserting (or removing) memory card
4
An SD memory card (not included) is recommended for recording.
Slide up to lock.
Lift up the cover
Recording indicator
Microphone
Lens
On/off switch
AV output
LCD screen
USB
Play/pause
MODE
Delete recordings
Setup menu
Switch between
Record
Photo preview and
Video preview modes
Audio speaker
+/– Adjust volume
during playback;
zoom during record
and preview
Tripod screw hole
/ – Skip to
previous or next
recording
To insert card: Push the card in until a click is heard
To remove card: Push card in until a click is heard,
then slowly release the card. As card is under minimal
tension when locked in memory slot, please use care
when removing.
5. Turning on the camcorder
There are three basic modes for operating the camcorder:
Video preview mode, Photo preview mode and Playback
mode. It will always launch in video preview mode after
being switched on. Refer to the diagram below for switching
between modes.
Slide and
Video preview
hold until the
camcorder turns
on or off
Press PLAY/PAUSE
1
In Video preview mode, press
RECORD
to record a video
2
In Photo preview mode, press
to record a photo
RECORD
6. Selecting recording quality
Settings
Resolutions (pixel) &
Frame Rates (FPS)
HQ
640 x 480 @ 30fps
WebQ
320 x 240 @ 30fps
1. In Video preview mode, press MENU to show the camcorder menu.
2. Press - or + to highlight Quality within the Video Menu
3. Press RECORD
to select Quality which will then expose the choices of HQ and WebQ.
4. Press - or + to highlight the desired Quality from HQ or WebQ, then press REC to save that
setting.
5. Press MENU to exit the camcorder menu. The selected setting (HQ or WebQ) appears on the
display screen during preview.
3
Actual recording time and capacity will vary depending on type of video content being recorded, system requirements,
and other factors.
Switch on
Press MODE
Photo preview
mode
1
mode
2
Press MODE
To end Playback mode,
simply press RECORD
which will then return
the camcorder to Video
preview mode
Playback mode
Approx. recording durations
3
on a 32 GB memory card
22 hours
33 hours