Automatic Programmes; Using The Accessories - IKEA FINSMAKARE Manual

ENGLISH
The function: Heat + Hold keeps prepared
food warm at 80 °C for 30 minutes. It turns
on after the baking or roasting procedure
ends.
You can turn on or turn off the function in
the menu: Basic Settings.
1. Turn on the oven.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press again and again until the
display shows: Heat + Hold.
5. Press to confirm.
When the function ends, a signal sounds.
Time Extension
The function: Time Extension makes the
heating function continue after the end of
Duration.

Automatic programmes

Warning! Refer to Safety
chapters.
Recipes online
You can find the recipes for the
automatic programmes specified
for this oven on the website
www.ikea.com. To find the proper
Recipe Book check the article
number on the rating plate on the
front frame of the oven cavity.

Using the accessories

Warning! Refer to Safety
chapters.
Inserting accessories
A small indentation at the top increases
safety. The indentations are also anti-tip
devices. The high rim around the shelf
prevents cookware from slipping off the
shelf.
Applicable to all heating functions
with Duration or Weight
Automatic.
Not applicable to heating
functions with the core
temperature sensor.
1. When the cooking time ends, a signal
sounds. Press any symbol.
The display shows the message.
2. Press to turn on or
3. Set the length of the function.
4. Press .
Recipes
This oven has a set of recipes you can use.
The recipes are fixed and you cannot change
them.
1. Turn on the oven.
2. Select the menu: Recipes. Press
confirm.
3. Select the category and dish. Press
confirm.
4. Select a recipe. Press
Wireshelf:
Push the shelf between the guide bars of the
shelf support and make sure that the feet
19
to cancel.
to
to
to confirm.