Munters CommBox Manual For Use And Maintenance page 46

use of unauthorised materials;
•
inadequate maintenance;
•
use of non-original spare parts and accessories.
•
Barring specific contractual terms, the following are directly at the user's expense:
preparing installation sites;
•
providing an electricity supply (including the protective equipotential bonding (PE)
•
conductor, in accordance with CEI EN 60204-1, paragraph 8.2), for correctly
connecting the equipment to the mains electricity supply;
providing ancillary services appropriate to the requirements of the plant on the basis
•
of the information supplied with regard to installation;
tools and consumables required for fitting and installation;
•
lubricants necessary for commissioning and maintenance.
•
It is mandatory to purchase and use only original spare parts or those recommended by the
manufacturer.
Dismantling and assembly must be performed by qualified technicians and according to
the manufacturer's instructions.
The use of non-original spare parts or incorrect assembly exonerates the manufacturer
from all liability.
Requests for technical assistance and spare parts can be made directly to the nearest
Munters office.