Indoor Unit Installation; Installing The Mounting Plate - Daikin FTXS25G2V1B Installation Manual

Indoor Unit Installation

1.

Installing the mounting plate.

• The mounting plate should be installed on a wall which can support the weight of the indoor unit.
1) Temporarily secure the mounting plate to the wall, make sure that the panel is completely level, and mark the boring
points on the wall.
2) Secure the mounting plate to the wall with screws.
Recommended mounting plate retention spots and Dimensions
Use tape measure
as shown.
Position the end
of a tape measure
at .
Through the wall
hole φ65mm
7
Recommended mounting
plate retention spots.
(5 spots in all)
115
φ65
61 149
Drain hose position
* The removed pipe port cover can be
kept in the mounting plate pocket.
Place a leveler on raised tab.
450
Bilt size: M10
Bilt size: M10
Liquid pipe end
Gas pipe end
278.5 50
Keep here the piece cut out
from the unit for piping.
800
Removed pipe
port cover
A
Mounting plate
103
400
200
φ65
175.5 60.5
■English