Table of Contents
Advertisement
WALL MOUNTING
Wall mount kit not included. Steps below are provided as an optional
alternative to the supplied base-mounts.
A
D
E
A Mounting bracket (x2)
B Shaft sleeve – M6 (x4)
C M6 x 54mm screw (x2)
D M6 x 45mm screw (x2)
4. Optional wall-mounting installation
a. Measure and double-check the distance of threaded holes on the back
panel of the TV before creating any holes in the wall.
b. Use two 54mm screws (C) to attach two shaft sleeves (B) within the top-
most threaded holes on the back panel of the TV.
c. Use two 45mm screws (D) to attach the remaining two shaft sleeves
within the lower threaded holes.
4b
B
C
F
E M6 x 60mm self-tapping
screw (x4)
F Wall anchor (x4)
C
B
4c
d. Use a mounting bracket (A) as a guide to mark the positions for the four
holes on the wall with a pencil.
e. Using a drill, create holes in the marked positions on the wall.
f. Insert the four wall anchors (F) into the screw holes in the wall.
g. Place the mounting brackets against the wall, aligned with the wall
anchors, ensuring the directional arrow is facing upwards.
h. Fix the mounting brackets with the 60mm self-tapping screws (E).
i. Attach the TV to the mounting brackets by placing all four shaft sleeves
into the larger openings of the brackets, then lowering the TV so that the
shaft sleeves "lock" into place within the brackets.
It is recommended that two people perform step 4i together to ensure the
sleeves are properly aligned before the TV is lowered onto the brackets.
A
4g
4h
E
F
D
NOTE:
B
Only use wall-mounts that match the same size screws and fittings as those
listed on this page. Other methods of wall-mounting have not been tested for
this model and can not be guaranteed to safely support the TV.
4i
18
Advertisement
Table of Contents
