Button Functions And Led Status Indicator - Fronius Primo GEN24 3.6 Operating Instructions Manual

Button functions
and LED status
indicator
Sensor functions
LED status indicator
1x WLAN access point
2x WPS
3-6 sec. Quit Service Message
Ok
Standby Connected
Uncritical Error
Connecting
(flashing)
(flashing)
Network Error
Critical Error
1x = WLAN Access Point (AP) is opened.
Flashing blue
2x = WLAN Protected Setup (WPS) is activated.
Flashing green
3 seconds
terminated.
Lights up yellow
The inverter is operating correctly.
Lights up green
The inverter starts.
Flashing green
The inverter is in standby, is not operational (e.g. no
feed-in at night) or is not configured.
Lights up yellow
The inverter indicates a non-critical status.
Flashing yellow
The inverter indicates a critical status and there is no
grid power feed process.
Lights up red
The status of the inverter is
shown via the operating status
LED. In the event of faults,
carry out the individual steps
in the Fronius Solar.start app.
The optical sensor is actuated
by touching with a finger.
The status of the connection is
shown via the communication
LED. To establish the connec-
tion, carry out the individual
steps in the Fronius Solar.start
app.
(max. 6 seconds) = the service message is
35