Advertisement
Commissioning
Detectors are supplied factory pre-set which ensures the lighting will switch on automatically as soon as power
is applied. Final commissioning of the detectors requires the use of an infrared Programmer. The QuickSet Pro
gives access to the full range of parameters and options but limited programming functions can also be carried
out using an HP18.
Commissioning Detectors using the QuickSet Pro Programmer
It is important that the Programmer be held perpendicular between 0.5m and 2m from the sensor.
1. Switch on by pressing any button (and unlock with top left rectangular button).
2. Point the programmer at detector and press the DOWNLOAD button. The programmer will confirm the
product's identity and call up the correct menu of parameters and their current settings.
3. Use a combination of UP, DOWN, FORWARD and BACK buttons to navigate the parameter menu,
selecting options for each shown.
4. When options for all parameters have been selected, point the programmer at the detector and press the
UPLOAD button. The luminaire(s) will switch off briefly during the programming process.
5. After a short period of inactivity (default 5 minutes), the programmer hibernates retaining the most recent
settings.
OneSwitch Dimming
OneSwitch dimming affords local control to the end-user whereby a simple, momentary, push-to-make wall
switch can be used to raise or lower the lighting level or to toggle the output ON/OFF. A press of less than
1 second will toggle the output status while a longer press will raise or lower the output. Each time the switch is
pressed, the direction of dimming reverses. If the switch has not been pressed for 5 seconds, the direction will
be up (brighter) - unless the output is already above 90% (dc 8V) in which case the direction is down.
To Test with Hand-held Controller
Once the LightSpot Luminaire Controllers have been installed within the luminaires, a Hand-held Controller or
Programmer (HC5A or HP18) may be used to dim and brighten luminaires and to switch them ON and OFF.
NB: See also 'Important Additional Notes' overleaf.
Advertisement
