Advertisement
Electrical Connections
SIDE VIEW
Analogue 1-10V
Control Module
(Height = 22mm)
Mains Supply
Mounting Details
The MSM2000 Control Module is designed to be mounted within the luminaire on fixing centres of 135mm.
Connections to the control module as shown above should be made using solid strand wire (0.5-1.5mm ).
The interconnect cable between the detector head and control module should be routed away from other
luminaire internal wiring and away from the lamp end-caps.
The recommended position for the detector is in the middle of the luminaire. Where this is not possible and the
detector is fitted near on end of the lamps, please ensure that the detector is at the 'cold' end of the lamps.
The DHW/S Mini Detector Head should be mounted such that only the raised front section of the bezel protrudes
through the cut out in the louvre or infill panel, constructed in accordance with the dimensions above.
Installation Guidelines
1. The Mini Detector Head must be mounted within the luminaire. Do not mount remotely.
2. The connecting cable must not be extended.
3. Artificial light illuminating the Mini Detector Head must only be reflected from the room - i.e. there must be no
direct illumination.
4. In order to receive satisfactory light-level regulating operation, a detector must observe a substantially greater
proportion of artificial light from the luminaire(s) under its control than from neighbouring luminaires not under its
control. This is particularly important when planning the installed layout of linear luminaires that have an integral
detector positioned at one end.
TOP VIEW
}
Polarity-free
Digital Output
Neutral
TM
OneSwitch Input
N/C
Live IN
OneSwitch Input
for manual control
32mm
21.5mm
Mini Detector
Head
Control Module Part No
MLSM2000D MKII
MLSM2000DALI MKII
by Honeywell
Ex-Or Limited
MSM2000D MKII
St. Mark's Court,
MSM2000DALI MKII
North Street,
Operating voltage 230V~50Hz±10%
Horsham,
Control output: Digital
Max 4 x DSI or 4 x DALI Ballast
RH12 1BW
Power consumption: <2W
www.ex-or.com
tc 70 C
Please read instructions prior to installation
135mm
147.5mm
MSM2000D
}
Polarity-free
Digital Output
Neutral
OneSwitch Input
N/C
Live IN
Digital Regulating Ballast(s)
}
Polarity-free
Digital Input
Neutral
Live IN
800mm
Flying Lead
MLS Bus
Polarity Free
Detector
Connection
Made in UK
RJ12
Plug
2
Advertisement
