Table of Contents
Advertisement
To return to 12.5 kHz bandwidth:
•
Turn your radio Off.
•
Turn your radio back On while pressing M and J.
•
A single power-up chirp will sound indicating that your radio is now set to
12.5 kHz bandwidth on all Channels, if Button Beeps are enabled.
Advanced Features
(T7200)
Understanding Repeater Channels
If you have a GMRS Repeater and wish to use it, you must set your
T7200 to repeater mode. Those Channels are identified on the
display by having both x in the Interference Eliminator Code area
and
at the bottom right of the display. They are identified as
l
channels 15 x - 22 x.
To enable Repeater Channels on your T7200:
•
Turn your radio Off.
•
Turn your radio back On while you press and hold the
A unique power-up chirp will sound (if Button Beeps are enabled) indicating that your
radio now has repeater capability. Now you can talk to other T7200 radios that are
set to your same Repeater Channel, Interference Eliminator Code, and Eavesdrop
Reducer Code.
34
and
for 3 seconds.
M
B
x
Advertisement
Table of Contents
