8
Troubleshooting
Drying process lasts for a long time.
•
Pores of the fibre filter might be clogged. >>> Wash the filter with warm water.
•
Condenser might be clogged. >>> Wash the condenser.
•
Ventilation grills at the front of machine might be blocked. >>> Remove any items in
front of the ventilation grills that block ventilation.
•
Ventilation might be inadequate if the installation area is very small. >>> Open the
windows and doors in order to prevent excessive increase in room temperature.
•
There might be furring on the damp sensor. >>> Clean the damp sensor.
•
Laundry might be overloaded. >>> Do not overload the tumble drier.
•
Laundry might not have been adequately spun. >>> Increase the rpm of tumble drier.
Laundry is still wet at the end of drying.
C
Hot laundry unloaded at the end of drying feel wetter than they really are.
•
You may not have used a programme suitable for laundry type.>>> Check the
maintenance labels on the laundry and select a programme suitable for their type, or
use the time programmes additionally.
•
Pores of the fibre filter might be clogged. >>> Wash the filter with warm water.
•
Condenser might be clogged. >>> Wash the condenser.
•
Laundry might be overloaded. >>> Do not overload the tumble drier.
•
Laundry might not have been adequately spun. >>> Increase the rpm of tumble drier.
Tumble drier does not turn on or programme cannot be started. Tumble drier does not acti-
vate when set.
•
The power cord might not be plugged in. >>> Make sure the power cord is plugged in.
•
Loading door might be open. >>> Make sure that the loading door is properly closed.
•
You may not have set the programme or pressed the Start/Pause button. >>> Make sure
that you have set the programme and it is not in Pause position.
•
Child lock might be active. >>> Disable the child lock.
Programme was interrupted for no reason.
•
Loading door might not be properly closed. >>> Make sure that the loading door is
properly closed.
•
A power cut might have occurred. >>> Press the Start/ Pause button to start the
programme.
•
Water tank might be full. >>> Drain the water tank.
Laundry is shrunk, damaged or worn out.
•
You may not have used a programme suitable for laundry type. >>> Check the
maintenance labels on the laundry and select a programme suitable for their type.
The lighting inside the tumble drier does not turn on. (In models with lamps)
•
You may not have turned on the tumble drier be using On/Off/Cancel button. >>> Make
sure that the tumble drier is at 'on' position.
•
Lamp might be broken. >>> Contact the Authorised Service for the replacement of
lamp.
Filter cleaning warning led is on.
•
Fibre filter might not have been cleaned. >>> Clean the filter.
Dryer / User Manual
29 / EN