CHAPTER 1: Introduction
1.3 Related Documents
SDLT 1.5 (320) Engineering Specification 81-81149-01
•
1.4 Structure of this Manual
Chapter 1, Introduction, is the chapter you are currently reading.
•
Chapter 2, SDLT 220/320 Product Information, describes various features
•
of the SDLT technology and the modular design used to build this exciting
product.
Chapter 3, Drive Specifications, lists various specifications for the tape
•
system: product, functional, environmental, and recording media.
Chapter 4, Installing Your Tape Drive, contains handling and pre-
•
installation guidelines, configuration advice, plus mounting and installation
information for your SDLT tape drive.
Chapter 5, Using Your Tape Drive, contains information on running the self-
•
test, descriptions of the front panel controls and LEDs, updating the firmware
(microcode), and various pointers for caring for your SDLT tape drive.
Chapter 6, SCSI Description, provides a high-level description of the logical
•
interface to the tape system.
Chapter 7, Regulatory Compliance, describes various regulations that apply
•
to the SDLT tape drive.
Appendix A, Super DLTtape I Data Cartridge, provides media data
•
cartridge information for the Super DLTtape I data cartridge including
handling and inspection procedures, information on the write-protect switch,
and how to load and unload a tape cartridge.
Appendix B, DLT IV Cartridge, includes the cartridge insertion and ejection
•
guidelines.
Glossary provides definitions for technical terms and acronyms that are used
•
throughout the document.
1-2
SDLT 220 and SDLT 320 Product Manual
March 2004
81-85002-01