Transmission Test - Danfoss 088U0230 Instructions Manual

Instruction CF-RU Repeater Unit

4 . Transmission Test

Initiate transmission test on the Repeater Unit – fig 4
• Press the push button
• LED goes ON
Link test is satisfactory
• LED goes OFF
• Mount the front cover again
Link test is unsatisfactory
• LED flashes  times
No transmission to room / Repeater Unit
• Try to relocate the Repeater Unit
• Or install one or up to three Repeater Units and place them
between the Master Controller and Room Thermostat
VI .UH .N1 .52
Produced by Danfoss Floor Heating Hydronics 08.2008
9