Sony FW-98BZ50L Reference Manual page 5

FW-65BZ40L / 65BZ35L / 65BZ30L / 55BZ40L /
55BZ35L / 55BZ30L / 50BZ30L / 43BZ30L
1 2
Screw hole on the rear cover
M6 machine screw
Rope or chain (not
4
Screw (not supplied)
The length of the M6 machine screw differs depending
on the rope or chain diameter. Please refer to below
illustration.
10 – 12 (mm)
Screw (M6)
Rope or chain
VS
3
Anchor the LCD Display to the wall by using bolts, wall
anchor and chain (or rope).
FW-65BZ40L / 65BZ35L / 65BZ30L / 55BZ40L /
55BZ35L / 55BZ30L / 50BZ30L / 43BZ30L
Wall-mount holes
M6 eye bolts (not supplied)
VS
(supplied)
(not supplied)
supplied)
1.5 N·m
{15 kgf·cm}
VS
(supplied)
Rope or
chain (not
supplied)
Please refer to below illustration for M6 eye bolt length.
10 – 12 (mm)
VS
LCD Display's rear cover
Note
• Your LCD Display is shipped with screws attached to the
rear of the LCD Display depending on the LCD Display
model. (They are fastened in the screw holes for wall
mounting.) Be sure to remove the upper two screws prior
to anchoring the LCD Display to a wall.
• Securing the LCD Display to the Stand without securing
the LCD Display and the Stand to the wall provides
minimum protection against the LCD Display toppling
over. For further protection, be sure to follow the three
measures recommended.
Wall-anchor
(not supplied)
EN GB
M6 eye
bolt
5
EN