Quantum PX500 Series Installation Instructions Manual page 26

Quantum PX500 Series Tape Drive Installation Instructions
81-81301-04 A01
August 2006
Figure 26 Port
Configuration Screen
26
To display the SCSI ID assignments:
1 From the SANblade manager program, click
The port configuration screen displays (see
The port configuration screen allows you to change the SCSI ID order if
the Fibre Channel HBA drive supports persistent bindings.
Click on the drop down ID box to change the SCSI ID assignment as
desired.
Fibre Channel Connectivity Troubleshooting
.
Configure
figure 26).
SCSI ID
assignment