Table of Contents
Advertisement
Note
You can configure the amount of time that an entry remains in the MAC table.
4. Click Add.
The Add Static MAC Address window opens.
5. Configure the MAC address settings.
a. Specify a VLAN ID.
b. Specify a MAC address.
c. Select at least one port.
6. Click Save.
The Add Static MAC Address window closes.
QSS adds the MAC address.
Configuring IGMP Snooping
The Internet Group Management Protocol (IGMP) manages membership to IP multicast groups. IP hosts and
adjacent multicast routers use IGMP to establish multicast group memberships.
The IGMP Snooping page displays information about detected IGMP groups and provides access to IGMP
snooping configuration options.
1. Log in to QSS.
2. Go to Configuration > IGMP Snooping .
3.
Click
.
QSS enables IGMP snooping.
4. Configure the IGMP snooping settings.
Setting
Multicast flood blocking
Router Port
Fast Leave
5. Click Save.
QSS saves the IGMP snooping settings.
Configuring QoS Settings
Quality of service (QoS) improves network traffic shaping by classifying and prioritizing different network
devices and packets. QoS allows you to configure traffic policies and enabling these policies on the switch
ports.
To change the QoS priority of a port, go to Configuration > QoS , assign a priority value between 0 and 7,
and then click Save.
Blocks multicast flooding from unknown sources
Specifies which ports to use as the router port for the VLAN
After receiving an IGMP packet, QSS forwards the traffic through the
selected router ports.
Specifies the ports that support the IGMP v2 Fast Leave feature
After receiving an IGMP leave message, QSS stops forwarding
multicast traffic to the selected Fast Leave ports.
QSW-M2106PR User Guide
Description
QSS
22
Advertisement
Table of Contents
