Running, Editing, And Deleting A Protection Plan; Running A Protection Plan; Figure 29 Saved Protection Plan Run Now Button - Quantum GoVault 40GB Software Manual

Running, Editing, and Deleting a Protection Plan

Running a Protection
Plan
Figure 29 Saved Protection
Plan Run Now Button
GoVault™ Data Protection Software, Version 1.0 User's Guide
Use the three command buttons on the
display to run, edit or delete a protection plan:
Plans
• —See
Run now
•
Edit settings
•
Remove plan
The GoVault data protection software automatically runs your protection
3 plans according to your specified run schedule. You can run a plan
manually, at any time, regardless of the established schedule, by clicking
the green
Run now
Protection Plans
When you click
the displayed status of the protection plan from
then to
Running
Depending in part on the processor speed and memory
Note:
configuration of your computer, and in part on the total
amount of data you are backing up, the protection plan run
can be quite lengthy. You can continue working with other
applications during this time, but your system response will
likely be slower than normal.

Running, Editing, and Deleting a Protection Plan

Running a Protection Plan

—See Editing a Protection Plan
—See Removing a Protection Plan
button for the protection plan in the
display on the
Home
, the GoVault data protection software changes
Run now
, as it displays the progress of the run (see
Chapter 3 Operation
page
Home My Saved Protection
on page 40
on page 42
My Saved
page (see figure 29).
to
OK Starting
figure
, briefly,
30).
39