Advertisement
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
HADLEY DINING CHAIR
ITEM CODE 68619
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please
phone Amart Furniture, Customer Service Free call 1800 351
084
1
ITEM CODE 68619
Advertisement
Table of Contents
Related Manuals for Amart Furniture HADLEY 68619
Summary of Contents for Amart Furniture HADLEY 68619
- Page 1 ASSEMBLY INSTRUCTION HADLEY DINING CHAIR ITEM CODE 68619 Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please phone Amart Furniture, Customer Service Free call 1800 351 Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
- Page 2 PRE-ASSEMBLY PREPARATION Before you start: 1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2.Take care when lifting. Product should be assembled as near as possible to the point of use 3.Ensure that you have all required contents for complete assembly 4.Always read the assembly instructions carefully before beginning assembly.
- Page 3 PARTS LIST SEAT PART LEFT LEG RIGHT LEG FRONT APRON BACK APRON ITEM CODE 68619...
- Page 4 • Insert the dowels of the front apron (4)and the back apron(5)to the left leg(2)and the right leg(3). Please note that the angled legs are the back legs. • Assemble bolts (A), lock washers (E) and washers (D) through each hole of the front apron (4)and the back apron(5) using Allen Key (F).
- Page 5 • Assemble bolts (B), lock washers (E) and flat washers (C) through the wood block on the front apron and the side aprons to the seat part(1)using Allen Key (F). • Do not tighten the bolts at this point in time. ITEM CODE 68619...
- Page 6 • Attach the mats to the bottom of the legs. ITEM CODE 68619...
- Page 7 Carefully turn the chair over, and put the chair on the floor. Tighten each loose bolt a little at a time while making sure the chair remains level. Repeat until all loose bolts are tight. ASSEMBLY IS COMPLETE ITEM CODE 68619...
- Page 8 Care and maintenance REGULAR CARE: • Protect from direct sunlight • Vacuum regularly using low suction • Rotate reversible cushions regularly CLEANING: • Do not remove cushion covers for separate cleaning even though they may have zippers • Do not wash , Do not dry clean , Do not shampoo clean •...
Need help?
Do you have a question about the HADLEY 68619 and is the answer not in the manual?
Questions and answers