Asus ROG Rapture GT6 Quick Start Manual

Quick
Start Guide
ROG Rapture GT6
ROG Rapture AX10000 Tri-band Gaming Mesh Router
Model: GT6
Specifications:
DC Power adapter DC Output: +19V with max 2.37A current
DC Output: +19.5V with max 2.31A current
Operating Temperature
0~40 o C
Operating Humidity 50~90%
Before Setup
Preparing to set up an AiMesh WiFi system
Find two ROG Rapture GT6, and power them on.
1
Use a network cable to connect your modem to the WAN port of either ROG Rapture GT6. This ROG
2
Rapture GT6 will be the AiMesh router, and the other ROG Rapture GT6 will be the AiMesh node.
The LED indicator turns solid blue to indicate that ROG Rapture GT6 is ready for setup.
3
ASUS Router App
Download free ASUS Router APP to set up and
manage your router(s).
AiMesh Setup Steps
01
Prepare
Place your ROG Rapture GT6 router and node within 1~3 meters of
each other during the setup process.
02
AiMesh node
Keep your AiMesh node powered on and standby for AiMesh system
settings.
03
Launching ASUS Router APP
Launch ASUS Router APP, and then follow the on-screen instructions
to finish the AiMesh setup.
Storage 0~70 o C
Storage 20~90%
NOTES: When you're using a wireless backhaul to connect your router and AiMesh node, the WAN port on your AiMesh
node can be used as a LAN port providing up to 2.5G transimission speed.
Hardware Explanations
GT6 I/O Overview
LAN ports 1-3
Power switch
USB 3.2 Gen 1x1 port
2.5G/1G WAN port
GT6 LED Overview
LED indicator
AiMesh node
within
1~3 meters
AiMesh node
DCIN port
2.5G / 1G WAN port
Connect your modem to this
WAN port with a network cable.
LAN ports 1-3
Connect your PC to a LAN port with
a network cable.
ROG Rapture GT6 LED indicator
Solid blue:
Your ROG Rapture GT6 is ready for setup.
Solid white:
Your ROG Rapture GT6 is online and works well.
Solid red:
Your ROG Rapture GT6 router has no Internet
Aura RGB
connection. / Your node is disconnected from
the router.
Solid yellow:
The signal between your ROG Rapture GT6
router and the node is weak.
AiMesh router
AiMesh router