Table of Contents
Advertisement
Assemble the Food Hopper
1.
Align the food hopper with slots in the main body and press down.
2.
Attach the feeding slice and impellers (as shown below). Pay close attention to the
orientation of the "+".
3.
Align the impeller bottom cover with the slots and rotate in anticlockwise direction
until you hear a 'click'.
4.
Adjust the impeller ensuring the rubber part is covering the food outlet (as shown
below). Note: If the impeller is not installed correctly, it will not dispense food.
Incorrect
Correct
25
Advertisement
Table of Contents
