Kogan SMARTERHOME KAWPWTRFNTA User Manual
Kogan SMARTERHOME KAWPWTRFNTA User Manual

Kogan SMARTERHOME KAWPWTRFNTA User Manual

1.9l pet water fountain

Advertisement

Quick Links

KOGAN SMARTERHOME™
1.9L PET WATER FOUNTAIN
KAWPWTRFNTA

Advertisement

Table of Contents
loading

Summary of Contents for Kogan SMARTERHOME KAWPWTRFNTA

  • Page 1 KOGAN SMARTERHOME™ 1.9L PET WATER FOUNTAIN KAWPWTRFNTA...
  • Page 3: Safety And Warnings

    • Unplug the appliance from the outlet when it is not in use and before cleaning. • Do not operate the appliance if the cord is damaged. If the appliance malfunctions or has been damaged in any way, cease use immediately and contact help.Kogan.com for support.
  • Page 4 COMPONENTS Fountain Water Filter Foam Filter User Guide...
  • Page 5 OVERVIEW Spout Filter Filter tray Tube Tank Mode button Status indicator Wi-Fi indicator Pump UVC light...
  • Page 6 ASSEMBLY Clean the inside of the tank, the lid and the filter tray using a soft cloth. Soak the water filter in clean water for 5 minutes. Fill the tank with clean water. Note: Do not exceed the maximum water level.
  • Page 7 Place the pre-soaked filter into the filter tray. Place the filter tray on the tank and then place the lid onto the filter tray. Filter Filter tray Connect the power cord to a USB (5V 1A) power adaptor then plug it into an electrical outlet.
  • Page 8 CONNECT TO SMARTERHOME™ APP Install App Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS). Play Store (Android) App Store (iOS) To register: If you already have a SmarterHome account, select ‘Log In’. To register a new account, select ‘Sign Up’.
  • Page 9 The SmarterHome™ app will begin scanning for nearby devices. If it doesn’t automatically detect the product, proceed to Step 3. Select the product type from the list of options in the app (Other > Kogan Smart Pet Fountain). Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.
  • Page 10 Set device in pairing mode When the device is first turned on, it may automatically enter pairing mode (Wi-Fi indicator is flashing rapidly). If not automatically in pairing mode when powered on, you can manually set the device in pairing mode: Disconnect the power adapter, wait 10 seconds then reconnect it and tap “Next”.
  • Page 11 The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until connection is complete. After successfully being added, you will have the option to rename the device and assign it to a location.
  • Page 12 “AP Mode” connection. Using AP Mode to add device Follow the previous steps to select your product type (Other > Kogan Smart Pet Fountain). Adjust your connection method by tapping on the mode type in the top-right corner of the screen.
  • Page 13 Follow the in-app prompts to continue AP Mode connection, which will pair your mobile phone to the device’s Wi-Fi hotspot to ensure a connection. This may be named “SL-KoganSmart”, “SmartLife-XXXX”, or another similar name. Note: If the Wi-Fi hotspot does not appear on your phone in the list of available networks, your device may not be set in AP Pairing Mode correctly.
  • Page 14: Operation

    OPERATION Switching Modes This product features two different modes: normal and geyser. To switch between the two modes, press the Mode button. Alternatively, you can swap modes using the app. • Normal Mode: In this mode, water will flow continuously without any interruptions. •...
  • Page 15: Cleaning And Care

    CLEANING & CARE • Clean the fountain at least once a week to prevent the build-up of dirt, debris, and bacteria. • Before cleaning, always unplug the fountain from the power source. Disassemble the fountain components, including the pump, filters, and water tank. •...
  • Page 16: Troubleshooting

    TROUBLESHOOTING Indicator Status Indicator Meaning Status indicator ON Low water Status indicator flashing RED Filter needs to be replaced Wi-Fi indicator ON Connected to network Ready to pair with SmarterHome Wi-Fi indicator flashing rapidly (EZ Mode) Ready to pair with SmarterHome Wi-Fi indicator flashing slowly (AP Mode) SPECIFICATIONS...
  • Page 17 NOTES...
  • Page 20 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...

Table of Contents