Table of Contents
Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (Wi-Fi indicator
is slowly flashing blue).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the set button for 5 seconds. You will hear an audio
tone and both indicators will light up. When the Wi-Fi indicator is slowly flashing blue, the
feeder is now in pairing mode.
Add device through network
1.
Once registered, tap "Add Device" on the app's home page, or the "+" in the upper
right corner, to add a new device through the network.
2.
Select the product type from the list of options in the app (Other > Smart Pet
Feeder with Camera).
3.
Ensure that the device is in pairing mode, with the Wi-Fi indicator slowly flashing
blue, and tap "Next".
4.
Enter your Wi-Fi details. It is important that your SmarterHome™ device and the
app are connected to the same Wi-Fi network during setup.
Notes:
• The device and the app have to use the same Wi-Fi network.
• The device is only compatible with 2.4Ghz networks.
• Depending on the product, Steps 3 and 4 may be in opposite order.
11
Advertisement
Table of Contents
