Winding/Installing The Bobbin; Bobbin Precautions; Winding The Bobbin - Brother SE1800 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Winding/Installing the Bobbin

This section describes how to wind the thread onto the bobbin, and then insert the bobbin thread.

Bobbin precautions

Be sure to observe the following precautions concerning the bobbin.
CAUTION
● Only use the Bobbin (part code: SA156, SFB: XA5539-151) designed specifically for this
sewing machine. Use of any other bobbin may result in injuries or damage to the machine.
● The included bobbin was designed specifically for this sewing machine.
If bobbins from other models are used, the machine will not operate correctly. Use only the
included bobbin or bobbins of the same type (part code: SA156, SFB: XA5539-151).

Winding the bobbin

Wind the thread around the bobbin to prepare the bobbin thread.
a Bobbin winder
Memo
The order that the machine should be threaded for winding the bobbin is indicated by a broken line on
the sewing machine. Be sure to thread the machine as indicated.
Actual size
11.5 mm
(7/16 inch)
This model
Other model

Winding/Installing the Bobbin 25

1