Table of Contents
Advertisement
A2 (German) - Used in Australia, Malaysia, etc.
●
– Regular broadcast (Standard Audio): No Indicator /
– BILINGUAL or DUAL MONO (MAIN I / SUB II):
– STEREO:
/
= Note =
If the stereo signal is poor or the receiving conditions are not optimum or if
●
STEREO:MONO automatic switching occurs, it is recommended to switch
from STEREO to MONO.
Even when the contents of the receiving signal undergo changes,
●
selection mode is kept intact.
When the receiving conditions deteriorate, listening will be easier if the
●
mode is set to the MONO position pressing the Sound Selection button.
DUAL, also known as DUAL MONO or as BILINGUAL is not currently
●
transmitted in some countries.
Digital Audio Preference
(Dolby D
/ MPEG)
Selects the initial setting for audio tracks.
Dolby
D:
The priority is given to Dolby Digital.
MPEG:
The priority is given to MPEG.
Dolby Digital is the method of coding digital signals developed by the
●
Dolby Laboratories. Apart from stereo (2ch) audio, these signals can also
be multi-channel audio.
MPEG is an audio compression method that compresses audio to the
●
smaller size without any considerable loss of audio quality.
For Digital TV
●
SPDIF Selection
(Auto
/ PCM)
Selects the initial setting for digital audio output signal from DIGITAL AUDIO
OUT and HDMI2 / HDMI4 (ARC function) terminals.
SPDIF is a standard audio transfer file format.
●
- 60 -
/
Advertisement
Table of Contents
