Gas Conversion; Tools And Parts For Gas Conversion - KitchenAid 860-0028 (LP) Installation Instructions And Use & Care Manual

Components
Main Burner
Rear Burner
Searing Burner (SSB)
Side Burner (SB)
IMPORTANT: The different burner valves in this grill have different BTU ratings. This means that the amount of gas coming from
each orifice varies in order to create the BTU's. The holes in the orifices themselves are drilled to different sizes so as to allow the
proper amount of gas to flow through them. Please note the chart above as an easy reference for the various orifice opening sizes
for the different valves in the grill.
WARNING
This conversion kit shall be installed by a qualified
service agency in accordance with the
manufacturer's instructions and all applicable codes
and requirements of the authority having jurisdiction.
If the information in these instructions is not
followed exactly, a fire, explosion or production of
carbon monoxide may result causing property
damage, personal injury or loss of life. The qualified
service agency is responsible for the proper
installation of this kit. The installation is not proper
and complete until the operation of the converted
appliance is checked as specified in the
manufacturer's instructions supplied with the kit.
GAS CONVERSIONS
860-0028 (LP), 870-0028 (NG) orifice sizes
Liquid Propane (LP)
Orifice Size
1.02 mm
1.07 mm
1.15 mm
1.02 mm
BTU/HR
12,000
13,000
15,000
12,000

Tools and Parts for Gas Conversion

Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
21
Natural Gas (NG)
Orifice Size BTU/HR
1.70 mm
1.84 mm
1.90 mm
1.70 mm
6mm
12,000
13,000
15,000
12,000