Table of Contents
Advertisement
C VPLL-ZM101*
shading sheet
Before attaching the projection lens to the
projector, it is required to attach the shading
sheet supplied with the lens adapter after
attaching the lens adapter.
1
Remove the two screws from the lens
adapter.
2
Fit the shading sheet to the projection
lens as illustrated and fasten it to the
lens with the two screws.
*1: VPL-FX500L only.
44
Attaching/Removing the Projection Lens
1
: Attaching the
Shading
sheet
D VPLL-Z4007: Adjusting the
peripheral focus
When attaching the VPLL-Z4007, adjust the
peripheral focus in addition to the usual
focus adjustment.
1
Project an image and adjust the
projected image size with the zoom
lever.
2
Rotate and fix the peripheral focus
ring at the center of the movable
range.
Peripheral focus ring
3
Adjust the center point focus of the
projected image with the focus lever.
4
Rotate the peripheral focus ring to
adjust the focus of peripheral area.
Note
If rotating the peripheral focus ring all the
way does not adjust the focus of the
peripheral area, see "When the peripheral
focus cannot be adjusted" (page 45).
Zoom lever
Focus lever
Advertisement
Table of Contents
