Download Print this page

Sage Smart Tea Infuser STM600 Quick Manual page 3

Hide thumbs Also See for Smart Tea Infuser STM600:

Advertisement

Available languages
  • EN

Available languages

• Do not operate the kettle on sink
drain board.
• Always ensure the appliance
is properly assembled before
connecting to a power outlet and
operating. Follow the instructions
provided in this book.
• The installation of a residual
current safety switch is recom-
mended to provide additional
safety when using all electrical
appliances. Safety switches
with a rated operating current
not more than 30mA are recom-
mended. Consult an electrician
for professional advice.
• The glass jug must be used only
with the power base supplied.
Do not use on a range top.
• The appliance is not intended
to be operated by means of
an external timer or separate
remote control system.
• Do not touch hot surfaces.
Use the handle for lifting and
carrying the glass jug.
• Attach the jug lid securely to the
glass jug before operation.
• Do not place anything on top
of the lid.
• Do not open the jug lid during
operation as scalding may occur.
• Extreme caution must be used
when moving the glass jug
containing hot liquid.
• Use caution when pouring water
from the glass jug as boiling
water and steam will scald.
Do not pour the water too quickly.
• To avoid scalding, never fill the
glass jug past the 'MAX' line
marking.
• Do not operate the appliance
without water. Always fill the
glass jug to at least the 'MIN'
marking. Should it be operated
without water, the boil-dry
protection will shut the power
off automatically. Allow the
appliance to cool before refilling.
WARNING
• Do not remove the glass jug
from the power base during
heating or when the basket is in
operation. Ensure the appliance
has completed the water heating
or tea brewing cycle before
removing the glass jug from the
power base.
• The use of accessory attach-
ments not recommended by
Sage
may result in fire, electric
®
shock or injury to persons.
• Always ensure the appliance
is turned OFF, unplugged at
the power outlet and has been
allowed to cool before cleaning,
attempting to move or storing.
• When the appliance is not
in use or when left unattended,
disconnect the power cord from
the wall outlet.
• Allow the appliance to cool down
in between brewing cycles.
EN
3

Advertisement

loading