PRE-ASSEMBLY PREPARATION Before you start: 1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2.Take care when lifting. Product should be assembled as near as possible to the point of 3.Ensure that you have all required contents for complete assembly 4.Always read the assembly instructions carefully before beginning assembly.
ITEMS REQUIRED A. ALLEN KEY B. BOLT M8X35MM 4PCS • Push bolt (B) into (4) of the bottom frame and secure leg(3) with bolt(B). • Tighten with allen key(A). ITEM CODE 65974...
Page 5
ITEMS REQUIRED A. ALLEN KEY B. BOLT M8X35MM 4PCS • Put bolt (B) into (3)of the leg then join top frame (2)and leg (3) • Tighten with allen key(A).. ITEM CODE 65974...
Page 6
• Adjust with plate (C ) if needed. • Lay the glass onto top frame(2), distribute the gaps evenly around four sides. ITEM CODE 65974...
PRODUCT CARE: If the glass is chipped or broken, stop using the product and consult place of purchase WARNING: • Do not place very hot or cold items on the glass surface unless adequately thick table mats are used to prevent such items coming in contact with the glass •...
Need help?
Do you have a question about the TIZONA 65974 and is the answer not in the manual?
Questions and answers