Sennheiser e 845 Technical Data

e 845
FEATURES
Rugged all metal body
Exceptional feedback rejection
Full dynamic range and smooth frequency
response for excellent signal quality
Consistent on-/off-axis and proximity
response
Very good rejection of handling noise
Hum compensating coil
ARCHITECT'S

SPECIFICATIONS

The high-performance lead vocal micro-
phone shall be a dynamic super-cardioid
type designed for rough stage use. The
microphone shall have a rugged metal body
and a shock-mounted capsule and shall
include a hum compensating coil.
The frequency response shall be 40 Hz –
16,000 Hz and the sensitivity (free field,
no load) shall be 1.8 mV/Pa at 1 kHz. The
nominal impedance shall be 350 O, with a
min. terminating impedance of 1 kO.
The microphone shall provide a 3-pin XLR
connector. Dimensions shall be 46 x 185 mm
(1.81" x 7.28"). Weight without cable shall
be 330 grams (11.64 oz). The microphone
shall be the Sennheiser e 845, the variant
with a silent ON/OFF switch shall be the
Sennheiser e 845 S.
High-performance lead vocal microphone designed for rough stage use
Extended high frequency response and super-cardioid pick-up pattern for
higher signal output, cuts through high on-stage sound levels. Smooth warm
tonal response and full dynamic range, with presence lift for vocal clarity and
projection. Consistent on/off axis and proximity response maintain sound
quality while moving, providing greater on-
stage freedom.
Full metal construction and extensive
suspension and shock-mounting minimize
handling noise and signal interference. High
output performance microphone, offering
power, clarity and projection (also available
with a switch: e 845-S).

TECHNICAL DATA

Transducer principle (Microphone) .....................dynamic
Pick-up pattern ........................................................super-cardioid
Frequency response (microphone) .....................40 –16,000 Hz
Sensitivity (free field, no load at 1 kHz) ...........1.8 mV/Pa
Nominal impedance ................................................350 O
Min. terminating impedance ................................1000 O
Connector ..................................................................XLR-3
Dimensions ...............................................................d 46 x 185 mm
Weight w/o cable ....................................................330 g
DELiVERy iNCLuDES
1 e 845
1 microphone clip
1 pouch
instructions for use