Connection / Disconnection; Maintenance - Magic 100 CNT Manual

Connection / disconnection :

• Disconnect the power supply before plugging or unplugging the
connections to/from the battery.
• Always ensure the Red clamp is connected to the «+» battery terminal
first. If it is necessary to connect the black clamp to the vehicle chassis,
make sure it is a safe distance from the battery and the fuel line. The
charger must be connected to the mains.
• After charging, disconnect the charger from the mains, then disconnect
the negative clamp from the car body and then disconnect the positive
clamp from the battery, in this order.
Connection :
• The charger must be connected to an earthed power supply.
• The connection to the power supply must be carried out in compliance
with national standards.

Maintenance :

• If the power supply cable is damaged, the replacement cable must
be obtained from the manufacturer or its service team.
• Maintenance should only be carried out by a qualified person.
• Warning ! Always disconnect from the mains before performing
maintenance on the device.
• The device does not require any specific maintenance.
• If the internal fuse is melted, it must be replaced by the manufacturer
or by an equally qualified person to prevent any accidents.
• Do not use solvents or any agressive cleaning products.
Regulations :
• The Machine is compliant with European directives.
• The declaration of conformity is available on our website.
• EAEC Conformity marking (Eurasian Economic Community).
• Equipment in compliance with British requirements. The British Decla-
ration of Conformity is available on our website (see home page).
• Equipment in conformity with Moroccan standards.
• The declaration C‫( م‬CMIM) of conformity is available on our
website (see cover page).
Waste management:
• This product should be disposed of at an appropriate recycling facility.
Do not throw away in a household bin.
MAGIC CHARGER 100 CNT
EN
15 15