Advertisement
If headset is still not paired (see LED status on reverse) you can manually pair your headset and adapter.
From powered off state, press the Power button for 6 seconds until LED begins to flash rapidly.
Release the button; headset is now in pairing mode.
On wireless adapter: press the Pair/Connect button on the wireless adapter for 6 seconds until the LED flashes rapidly. Release button; headset and adapter should now be paired.
HEADSET | |
STATUS/CONDITION | LED STATUS OR ACTION |
Paired/connected | LED solid blue flash |
Pairing | LED rapid blue flash |
Not connected | LED slow blue flash |
Pairing fails | If pairing mode times out, LED changes from rapid flash to headset power off |
Power off | 2 second button press, LED gets bright then turns off |
Power on | Press the Power button for 2 seconds, LED comes on to appropriate status |
Low battery | LED triple blue flashes |
Auto shut down | Headset shuts down after defined period of time with no signal from wireless adapter |
WIRELESS ADAPTER | |
STATUS/CONDITION | LED STATUS OR ACTION |
Paired | LED solid blue flash |
Pairing | LED rapid blue flash |
Not connected | LED slow blue flash |
Pairing fails | If pairing mode times out, LED goes into "not connected" state |
Patents US D589492; Brazil DI68056010; China ZL200830349586.8;
EM 001053631-0001; Taiwan D132123; and Patent Pending
84246-01 (09.10) Rev B AM 84247-01
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Plantronics GameCom X95 Connection and Troubleshooting Guide
Advertisement
Need help?
Do you have a question about the GameCom X95 and is the answer not in the manual?
Questions and answers