Symbols & Labels S Y M B O L S & L A B E L S Symbols & Labels THe fOLLOwInG SYMBOLS And defInITIOnS Are fOUnd THrOUGHOUT THIS MAnUAL And Are deSIGned TO MAke YOU AwAre Of POTenTIAL HAzArdS Or SYMBOLS &...
S A F E T Y & O P E R AT I O N S INTRODUCTION The FS-150 walk-behind air saw is designed for simple operation and has been proven to be extremely useful and versatile. A 12” to 20”...
Page 4
O P E R AT I O N S C. AFTER OPERATING THE SAW 1. Shut off air supply and disconnect from saw. 2. Remove the air line and fit a protective cover over the air inlet. 3. Clean the saw by removing all accumulated dust. 4.
Page 5
PA R T S Part Number Description FS-150 US60050 Walk-behind air powered saw with gear box motor, 20” blade ca- pacity, water feed kit, whip hose, oiler, wrenches, and one quarter ice free air oil. 3,300 RPM saw cuts to 8” depth. Air Tool Oil 02-17059 (1) Quart of petroleum based ice free oil...
Page 6
PA R T S P: 866 987-7297 F: 813-621-7125 Waterworks Visit us at www.ussaws.com Division sales@ussaws.com...
Page 7
U.S.SAWS will, at it’s sole option, repair or replace, at the U.S.SAWS factory or at a point designated by U.S.SAWS, any part, which shall appear to the satisfaction of U.S.SAWS inspection to have been defective in material or workmanship.