Advertisement
7
Commissioning
•
The FusionSolar app is recommended when the solar inverter is connected to the FusionSolar
smart PV management system. The SUN2000 app is recommended when the solar inverter is
connected to other management systems.
•
The FusionSolar app or SUN2000 app communicates with the solar inverter through the
WLAN module, Bluetooth module, or USB data cable to provide functions such as alarm
query, parameter settings, and routine maintenance.
•
Access the Huawei app store (https://appstore.huawei.com), search for FusionSolar or
SUN2000, and download the app installation package. You can also scan the QR codes below
to download the apps.
FusionSolar App
•
The screenshots are for reference only. The actual screens may vary.
•
When the WLAN connection is used, the initial name of the WLAN hotspot is Adapter-
module SN
, and the initial password is Changeme.
•
When you log in to the system for the first time, set the login password. To ensure account
security, protect the password by changing it periodically, and keep it secure. Your password
might be stolen or cracked if it is left unchanged for extended periods. If a password is lost,
devices cannot be accessed. In these cases, the Company shall not be liable for any loss
caused to the plant.
•
Set the correct grid code based on the application area and scenario of the solar inverter.
Scenario in Which Solar Inverters Are Connected to the FusionSolar Smart PV
Management System
1. Open the FusionSolar app, log in to intl.fusionsolar.huawei.com using an installer account,
and choose Me > Device commissioning. Then, scan the QR code on the WLAN module or
the bar code on the Bluetooth module, or manually connect to the device via the WLAN
hotspot, Bluetooth, or USB port to access the device commissioning screen.
2. Enter the login password.
3. Tap Log in and go to the Quick Settings screen or the solar inverter screen.
Scenario in Which Solar Inverters Are Connected to Other Management Systems
1. Open the SUN2000 app, scan the QR code on the WLAN module or the bar code on the
Bluetooth module, or manually connect to the device via the WLAN hotspot, Bluetooth, or
USB port to access the device commissioning screen.
2. Enter the login password.
3. Tap Log in and go to the Quick Settings screen or the solar inverter screen.
SUN2000 App (Android)
19
SUN2000 App (iOS)
WLAN
Advertisement
