Registering Magic Remote Control; How To Use Magic Remote Control; Precautions To Take When Using The Magic Remote Control - LG 55EA970T-TA Owner's Manual

Registering Magic Remote Con-
trol
It is necessary to 'pair' (register) the magic remote con-
trol to your TV before it will work.
How to register the Magic Remote Control
BACK HOME
1 To register automatically, turn the
TV on and press the Wheel(OK)
button. When registration is
completed, the completion
message appears on the screen.
2 If registration fails, turn the TV
P
off and back on, then press the
Wheel(OK) button to complete
registration.
MY APPS
How to re-register the Magic Remote Control
BACK
1 Press and hold the BACK
SMART buttons together for 5
SMART
seconds to reset, then register it
by following "How to register the
Magic Remote Control" above.
2 To re-register the Magic Remote
Control, press and hold the
BACK
button for 5 seconds
toward the TV. When registration
is completed, the completion
message appears on the screen.
How to use Magic Remote Con-
trol
1 If the pointer disappears, move
the remote control slightly to left
or right. Then, it will automatically
appear on the screen.
» If the pointer has not been
used for a certain period of time, it
will disappear.
2 You can move the pointer by
aiming the Pointer Receiver of the
remote control at your TV then
move it left, right, up or down.
» If the pointer does not work
properly, leave the remote control
for 10 seconds then use it again.
MAGIC REMOTE CONTROL FUNCTIONS
If you press Wheel(OK) on the Magic Remote
Control, the following screen appears.
1
Shows information about the current programme
and screen.
You can select More Menu.
2
and
Precautions to Take when Using
the Magic Remote Control
y Use the Magic Remote Control within the maxi-
mum communication distance (10 m). Using the
Magic Remote Control beyond this distance, or
with an object obstructing it, may cause a com-
munication failure.
y A communication failure may occur due to nearby
devices. Electrical devices such as a microwave
oven or wireless LAN product may cause interfer-
ence, as these use the same bandwidth (2.4 GHz)
as the Magic Remote Control.
y The Magic Remote Control may be damaged
or may malfunction if it is dropped or receives a
heavy impact.
y Take care not to bump into nearby furniture or oth-
er people when using the Magic Remote Control.
y Manufacturer and installer cannot provide service
related to human safety as the applicable wireless
device has possibility of electric wave interference.
y It is recommended that an Access Point (AP) be
located more than 1 m away from the TV. If the
AP is installed closer than 1 m, the Magic Remote
Control may not perform as expected due to fre-
quency interference.
35
More