Installing The Canopy; Installing The Blades - Hunter Mill Valley 59309 Installation Manual

1886
Secure each blade to a blade iron as shown using the blade nuts,
found in the hardware bag, and the blade assembly screws,
found in the hardware bag.
Repeat x5
Lightly attach the blade arms to the
motor with screws found in the
hardware bag, then securely tighten
after both screws are attached.
Repeat x5
IMPORTANT
NOTE: The blade arms should be mounted with
the ridge facing downward. Installing it incorrectly
could result in your fan not functioning.
7
Ceiling Bracket Downrod

Installing the Canopy

Lift the canopy into place so that
the screw holes are aligned.

Installing the Blades:

Hanging Fan Wiring
Insert the two canopy screws
found in the hardware bag.
Ridge
Canopy Blades
x2
Canopy Screw
bag
x15
Blade Screw
bag
x15
Blade Nut
bag
Blade Arm Screw
bag
Light Bulb Pull Chain
x10