Inserting Accessories; Operation; Setting The Clock; Setting The Kitchen Timer - Silvercrest SMW 800 A2-09/11-V3 Operating Instructions Manual

Before the first regular usage of the microwave oven
the appliance must be heated up to remove any
remaining production residues.
Without foodstuffs or accessories (glass plate 3, star
roller 4 and grill stand t), switch the appliance on
in the mode Grill:
Press the button Grill once 6
•
With this you select the Grill operation.
In the display 1 appears the symbol
the symbol blinks. This indicates readiness
to start.
Adjust the control dial q to a cooking time of
•
10 minutes.
Press the button Start/Quick start q
•
start the grilling process.
Note:
On the first usage, the generation of light smoke and
a slight smell can occur, this is due to the production
residues. This is unharmful. Provide for sufficient
ventilation. For example, open a window.
• After 10 minutes, the appliance switches itself
off automatically. Signal tones sound. Open the
door. Wait until it has cooled down completely.
• Remove the plug from the mains power socket
then, after cleaning the appliance with a moist
cloth, dry it carefully.

Inserting accessories

Place the star rotator 4 centrally on the drive
•
shaft in the cooking area. Ensure that it slides
completely onto the axle and is firmly seated.
Place the glass plate 3 centrally on the star
•
rotator. The three rollers must be seated on the
leading edge on the glass plate 3.

Operation

Setting the Clock

When you take the microwave oven into use for the
first time, or there has been a power cut, the display 1
indicates "1 : 0 1 ".
1. Press the button Clock 9
.
in the display 1.Press the button Clock 9
once again should you wish to switch to the 24-
and
hour mode.
2. By turning the control dial q programme in the
current hour. The clock symbol
splay 1 blinks.
3. Press button Start/Quick Start q
to
minute indicator appears.
4. By turning the control dial q, programme in the
current minute.
5. When the clock is correctly set, press the Start/
Quick Start button q
the colon indicates, by blinking, that the clock is
running.
To read off the current time when the microwave oven
is in operation, press the button Clock 9
time will then be indicated in the display 1 for
approx. 4 seconds.

Setting the kitchen timer

The microwave oven is provided with a kitchen timer
which you can use independently of the microwave
operation.
Press the button Kitchen timer w
1.
appliance is in standby mode. In the display
appears 1 "00:10".
Now set the desired time using the control dial q.
2.
You can select any time range from 10 seconds
to 95 minutes.
- 62 -
in the display 1 glows continuously and
. "Hr 12" appears
in the di-
. The
. The clock symbol
; the
when the