Preparing The Appliance; Inserting Accessories; Operation; Setting The Clock - Silvercrest SMW 800 B2 Operating Instructions Manual

Preparing the appliance

• Remove all packaging materials and any
protective film on the surface of the housing.
DO NOT remove the light grey
flimmer cover plate, which is moun-
ted in the cooking area to protect
the magnetron.
• Insert the plug into a power socket. Use a 230 -
240 V ~ , 50 Hz, mains power socket with a
16A fuse. It is recommended that the microwave
oven is powered from its own ring main. If you
are unsure about how to connect the microwave
oven, consult a specialist.
Before the first regular usage of the microwave oven
the appliance must be heated up to remove any
remaining production residues.
Without foodstuffs or accessories (glass plate 3, star
rotator 4 and grill stand t), switch the appliance on
in the mode Grill:
Press the button Grill 6
•
you select the Grill operation. In the display 1
appears the symbol
blinks. This indicates readiness to start.
Adjust the control dial q to a cooking time of
•
10 minutes.
Press the button Start/Quickstart q
•
the grilling process.
Notice!
On the first usage, the generation of light smoke
and a slight smell can occur, this is due to the
production residues. This is unharmful. Provide for
sufficient ventilation. For example, open a window.
once. With this
and the symbol
to start
- 62 -
• After 10 minutes, the appliance switches itself
off automatically. Signal tones sound. Open the
door. Wait until it has cooled down completely.
• Remove the plug from the mains power socket
then, after cleaning the appliance with a moist
cloth, dry it carefully.

Inserting accessories

Place the star rotator 4 centrally on the drive
•
shaft in the cooking area. Ensure that it slides
completely onto the axle and is firmly seated.
Place the glass plate 3 centrally on the star
•
rotator. The three rollers must be seated on the
leading edge on the glass plate 3.

Operation

Setting the Clock

When you take the microwave oven into use for
the first time, or there has been a power cut, the dis-
play 1 indicates "1 : 0 1".
1. Press the button Clock 9
in the display 1.Press the button Clock 9
once again should you wish to switch to the 24-
hour mode.
2. By turning the control dial q programme in the
current hour. The clock symbol
play 1 blinks.
3. Press button Start/Quickstart q
minute indicator appears.
4. By turning the control dial q, programme in the
current minute.
5. When the clock is correctly set, press the Start/
Quickstart button q
the display 1 glows continuously and the
colon indicates, by blinking, that the clock is
running.
. "Hr 12" appears
in the dis-
. The
. The clock symbol in