Installing A Hi-Speed Usb 2.0 Hub - Belkin F5U220ea User Manual

P73768ea-B_F5U220uk 17-03-2003 13:46 Page 14
Verifying Proper Installation (Microsoft Driver)
After installation, check the Device Manager to confirm that the PCI Card
has been properly installed.
1. Right-click on "My Computer".
2. Select "Properties".
3. Select the "Hardware" tab and click on the "Device Manager" button.
4. Click the plus sign (+) next to "Universal Serial Bus Controllers".
The "Universal Serial Bus Controllers" list will now include two "NEC USB
Open Host Controller", one "Standard Enhanced PCI to USB Host
Controller", one "USB 2.0 Root Hub Device", and two "USB Root Hub"
entries.
Note: If your computer features built-in USB ports, or if you have other
USB PCI controllers installed, you will see additional host controller
and root hub entries.

Installing a Hi-Speed USB 2.0 Hub

Note: During installation of the Hi-Speed USB 2.0 PCI Card driver, a Hi-
Speed USB 2.0 hub driver is also installed. For instructions regarding
the installation of your USB 2.0 hub, consult the documentation
included with your hub.
INSTALLATION
14