Table of Contents
Advertisement
Assembly
A Phillips-head screwdriver is required for Assembly in Step 1.
1
Place the upper handle
onto the base and push
it down. Then attach
the handle with the 2
screws taped to the
handle in a plastic bag.
3
Insert the hose end into the back of the
vacuum and twist right to lock in place.
5
Now, put your accessory tools on the vacuum and you're ready to go!
Dusting Brush
NOTE: The PowerFoot will not suction properly unless the hose is firmly attached.
2
Insert the extension wand base and
turn it to the right to lock in place.
4
TurboEraser® Tool
Wrap hose up and
around the hose
wrap on the handle.
Slide end of hose
into vacuum base.
Extension Wand
(Crevice Tool stores inside)
BISSELL.com 5
Advertisement
Table of Contents
