Sound - Loewe Connect 32 User Manual

Connect 32
User manual
System settings

Sound

Sound
Calling the sound settings
The selectable menu items depend on the selected station and the
connected sound components.
HOME: Call Home view.
Mark System settings,
OK call System settings.
Mark Sound,
go to next column.
Sound
Sound via Sound via
Sound Sound
adjustment adjustment
Loudness Loudness
Sound pic-
Volume ad- Volume ad-
justment justment
more ...
Select sound function,
proceed to next column.
Explanations of the sound settings:
Sound via Playback over the TV speakers or an external hi-fi
amplifier.
The menu item Sound via only appears if HiFi/
AV amplifier or TV speakers (switchable) is
set in the audio components wizard (see chapter
System settings, section Connections – Sound
components).
Sound Here, you can adapt preset sound characteristics
adjustment of the respective broadcast. Selectable are, e.g.,
Speech, Classical, Pop, Custom music and Film
soundtracks. For personal music and film sound you
can do the settings for pitch and bass sound (high
and low frequencies).
Loudness Proper boost of bass and treble tones at low volume.
Sound If the sound and picture are not precisely in sync,
picture you may correct this here. Move the mark on the
synchronisa- bar downwards, slowing down the sound compared
tion with the picture. Move the mark upwards, speeding
it up compared with the picture. Time adjustment
of the sound occurs in steps of 10 ms in each case.
only available for DVB stations.
Volume The volume can differ according to the individual sta-
adjustment tions. If the sound is too loud or too quiet in relation
to other stations, adjust the volume.
When the menu is open, you can select the stations
one after another with P+/P– and adjust every
single station conveniently.
more ... call with OK.
74
Here you can choose whether you would like to hear
the sound via the TV speakers or via the sound projector.
Explanations of the sound settings (continued):
Loudspeaker/ For analogue stations:
Headphone Selection options for Mono/ Stereo or Sound 1 or
sound Sound 2 for bilingual programmes, separately for
the loudspeakers and the headphones.
Auto volume The volume may vary when receiving stations with
different standards, when switching from station to
station or during commercials.
You can reduce these differences in volume by
selecting auto volume on. For music and live
broadcasts you get a better sound spectrum with
auto volume off.
Maximum You can limit the volume adjustment of the
volume loudspeakers. This prevents selecting a volume
which is too loud.
Maximum Set the sound level to be heard after switching on the
switch on TV set with the mains switch or after a power failure.
volume When switching on the TV set in standby mode, the
volume last used is retained unless it was above this
switch-on level. Otherwise it is limited by this.
Balance Set stereo balance so that the volume impression is
identical on the left and right.