Samsung WF405ATPASU/A2 Service Manual page 19

Part
DRAIN PUMP
(Continued)
* Check Points for Troubleshooting
1. Separate the Drain Filter and check for any alien substances inside the pump (e.g. coins,
buttons .., etc.) → Remove if found.
2. Check the wire connector for the Drain Pump ASSY hasn't come loose. Reconnect if
necessary.
3. When water leaks, check the assembly status of the Clamp Hose, and Cap Drain → Take
the relevant countermeasure if necessary.
Turn the filter cap counterclockwise, clean and remove any material that has collected.
Figure
4. Remove the 2 screws holding the Drain Pump.
5. Drain the remaining water through the drainage
6. Disconnect the wire connector.
7. Push it back and lift it up.
Description
hose.
Removal and Reassembly _ 17